欢迎访问香蕉派(Banana Pi)开源硬件社区

社区产品

联系我们

当前位置:首页 >> 社区产品 >> STEAM教育产品

STEAM教育产品

香蕉派 BPI-UNO32 Arduino board 开发板采用 ESP32

采用ESP32芯片设计
支持2.4GHz Wi-Fi
支持 Bluetooth蓝牙 
支持 Arduino
    The BPI:UNO32 (also referred to as BPI-UNO32, stylised as BPI UNO32) is an ESP32 with Xtensa 32bit LX6 single/dual-core processor based embedded system. support Webduino ,arduino,microPython,Scratch.x function.

    BPI-UNO32 uses the ESP-WROOM-32 of espressif company as MCU. ESP32 is a single-chip solution integrating 2.4GHz Wi-Fi and Bluetooth dual mode. The 40 nanometer technology of TSMC has the best power consumption, RF performance, stability, versatility and reliability. It can deal with various application scenarios.

    Two separate controlled CPU cores, the main frequency can be up to 240MHz, 448KB ROM, 520KB SRAM.

    BPI-UNO32 The appearance size is fully matched with Arduino UNO R3

    Hardware inerface:

    Hardware spec:

    BPI-UNO32 Hardware spec
    CPU Xtensa® 32-bitLX6single / dual core processor
    ROM 448KB
    SRAM 520KB
    Flash 4MB(Onboard),A maximum of 4 Flash/SRAM, each Flash maximum 16MB
    Power 5V@1AmicroUSBpoweror 5.5mm 12VDCport
    GPIO 12-bits SAR ADC 18 channel, 2*8-bit D/A converter, 4*SPI, 2*I2S, 2*I2C, 3*UART, Host SD/eMMC/SDIO, Slave SDIO/SPI
    Wi-Fi 802.11 b/g/n/e/i 802.11 n(2.4GHz 150Mbps) 802.11 e(Quality of Service)
    Bluetooth BT4.2 & BLE
    Buzzer Passive buzzer
    LEDs RGB LED/POWER LED/Receive LED/Transmit LED
    Sizes 68mm*53mm
    Online Wiki documents: https://wiki.banana-pi.org/BPI-UNO32
    请提交您的基本信息,我们将会尽快与您联系!

    *

    *

    *

    *

相关产品